1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 234Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 234

Water Pump Servicing20, 25, 30 Disassembly 1Remove gearcase assembly as described in Gearcase Servicing, this Section [!]
2Apply OMC Triple-Guard grease to the two impeller housing -ringsInstall the small, thick shift rod a-ring Place the large
a-ring into the impeller housing21062 r13Lightly coat the exterior of the impeller cup with OMC Gasket Sealing CompoundAlign
tabs of the impeller cup with location holes of the impeller housing and install the impeller cup into the impeller housingf614Lightly
coat the impeller cup with oil and with counterclockwise rotation, install the impeller into the impeller cupSharp edge of
cam slot is leading edge during rotation Apply Scotch-Grip Rubber Adhesive 1300 to outside of water tube grommet Install