1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 235Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 235

1017Lightly oil pinion splines of the driveshaftSlide the driveshaft through the impeller housing and impeller until drive
if impeller cam is displaced9Lightly coat both sides of new impeller plate gasket with OMC Gasket Sealing CompoundPlace gasket
on the gearcase10Place the impeller plate over the gasket11Slide the driveshaft down into the gearcase and engage the pinionr,Ql12Turn
the driveshaft until holes ofthe impeller housing are aligned with holes of the gearcasePlace the washers on the six impeller