1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 237Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 237

f41 4then install the water tube grommet into the impeller housing Isl 5Lightly coat both sides of new impeller plate lower
on the impeller plate1sl 7Apply OMC Triple-Guard grease to the impeller drive pin and place the pin in the slot of the driveshaftL'
_::==_' 8Slide the impeller housing down the driveshaft, engage the impeller pin, and orient the housingApply OMC Gasket