1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 245Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 245

Assemble the tools using the long spacer, PIN 339753, to install the upper pinion bearingPress against the bearing's lettered
of the seal facing away from the gearcase Apply OMC Triple-Guard grease to the seal lips after installing10Coat the shift
rod a-ring with OMC Triple-Guard grease and install in shift rod bushingf101 11Place new washer and bushing on OMC Shift
Rod Bushing Installer, PIN 304515Apply OMC Gasket Sealing Compoundto the outside diameter of the shift rod bushingUsing mallet,
drive the bushing into the gearcase12Oil and place the forward bearing cone and roller assembly in the forward bearing cupf11l
13To install the forward gear and the shifter lever and yoke assembly, begin by threading OMC Yoke Locator, PIN 319991, through
the shift rod bushing and threading it into the shifter yokeRemove the cradle from the yokeThen, while pulling on the yoke