1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 253Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 253

r;Bl 15Use OMC Bearing Puller PIN 432130 attached to OMC Slide Hammer PIN 432128 to remove the forward bearing cupSecure
PI 326582 Rod PI 326583 Pilot Plate PI 326577 Remover and Installer inHex Head Screw -20 inHex Head Screw 1 in0.0Flat Washer
Place the tool in the gearcaseUsing mallet, drive the pinion bearings into the gearcase propeller shaft cavityDiscard the
bearings22 1 19Remove the shift rod bushing as follows: Position OMCShift Rod Bushing Remover PI 327693 Q) under the shift
rod bushing Thread the adapter of the universal slide hammer in the slide hammerPlace the adapter through the shift rod bushing
and thread into the remover tool Q) Remove the handle from the remover toolThen remove the bushing from the gearcase Once