1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 255Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 255

Assembly Make no dry assembliesLubricate bearings, shafts, and gears with OMC Ultra-HPF gearcase lube 12411Oil and install
casing of the seals before installing Install the inner seal with lip facing into the bearing housing and install the outer
seal with lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal lips after installing4lightly
apply OMC Triple-Guard grease to new bearing housing O-ringPlace the O-ring in groove ofthe bearing housing 12815Oil and
install the forward bearing cup into the gear6Coat the shift rod O-ring with OMC Triple-Guard grease and install in shift
rod bushing caseUse OMC Drive Handle, PIN 311880, and OMC Bearing Cup Installer, PIN 319929Support nose of gearcase on the
floor and seat the cup firmly in the gearcase COA3319 Apply OMC Gasket Sealing Compound to the outside diameter of the bushingInstall