1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 256Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 256

30 DR2088 1301 8Install the pinion bearings using the following components PI 326582 Rod PI 326583 Plate of OMC Universal
and install new driveshaft bearing Q) in the bearing sleeve using OMC Bearing Installer PIN 322923Press against the lettered
side of the bearing until the tool is seated on the bearing sleeveUsing the same tool attached to OMC Plate PIN 318122, press
the bearing sleeve assembly into the gearcase until the plate contacts the gearcasePress against the lettered side of the
bearing when installing it into the gearcaseCOA3216 3311341 10Install new seals back to back in the driveshaft bore using
OMC Seal Installer, PI 326552Apply OMC Gasket Sealing Compound to the metal casing of the seals before installingInstall
the inner seal with flush lip CD facing into the gearcase, then the outer sea with extended lip faci ng out of the gearcaseApply