1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 278Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 278

Starter Servicing9.915 Removal i and remove all spark plug leads "" 1Avoid accidental starting of engine while servicing;
Wear safety glasses while disassembling and assembling f51 3Pull the starter rope out far enough to tie slipknot in the ropePry
the starter rope anchor out of the handleRemove the handle, release the slipknot, and let pulley slowly wind up rope until
the rewind spring is completely unwound 1sl 4Remove the retaining ring, and lift the pawl and links as an assemblyr:;] 5Hold
the spindle nut under the housing, and remove Hold pulley in place to prevent starter spring from coming loose ill the spindle