1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 280Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 280

.ar.J2l 5Let spring slowly unwind, turning pulley '2 to 1'2 revolutions until rope anchor is opposite rope guide Insert Phillips
let spring slowly wind rope onto pulleyReinstall starter pawl components as an assemblyInstall E-ring with sharp edge up
9Check the operation of the pawlThe pawl should extend when the starter rope is pulled and retract when the starter rope
rewindsr:J6l 10Reinstall into Reinstall plunger, spring, tappet, and cam With retaining pinInstallation f171 11Position starter
on motorConnect starter lockout link to camTurn cam screw IN carefully until screw head contacts camDo not overtighten r:j8l