1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 285Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 285

Installation 1Inspect the starter mountIf the mounts are damaged or worn, replace as follows: Remove the mount using crescent
mounts3Install the starter lockout cable into the starter housingf21l 4Position the starter assembly onto the motorInstall
the three starter housing retaining screwsThe short screw CD is installed on the port side of the starter housing Tighten