1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 299Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 299

Starter System Voltage Drop Test By making systematic check of the starter system, any component or electrical connection
terminalTurn key switch to START to crank engineVoltage reading should not exceed 0.3 voltIn Step 2, connect the voltmeter
leads only while the engine is cranking, or damage to the voltmeter can occurrJl2Connect voltmeter negative lead to the starter
side of the starter solenoid terminalWhile cranking engine, connect voltmeter positive lead to starter solenoid opposite