1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 33Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 33

Break-In Procedure During the first 10 hours of break-in operation you must use 50:1 fueloil ratio in your fuel tank in addition
of water at the water pump indicatorNext 50 Minutes DO NOT operate engine above half throttle (no more than 3500 RPM) DO
NOT hold constant throttle settingChange engine speed every 15 minutesWith easy planing boats, use full throttle to quickly
accelerate boat onto planeImmediately reduce throttle to one-half as soon as boat is on planeBE SURE boat remains on plane
at this throttle settingSecond Hour _ Use full throttle to accelerate boat onto plane, then reduce throttle setting to three-quartersBE
SURE boat remains on plane at this throttle setting At intervals, apply full throttle for periods of one to two minutes,
returning to three-quarters throttle for cooling period Change engine speed every 15 minutes INotel Eight Hours _looking
for steady_ _water _indicatorVerify water pump operation by stream of water at the pump Next _ _ Avoid continuous full-throttle