1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 41Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 41

Submerged Engines Engine Dropped Overboard (Not Running) If engine is recovered from water immediately, it must be serviced
lines4Place engine in horizontal position (spark plug openings down) and work out all of the water by slowly rotating flywheel
approximately 20 times, or until there are no signs of water5Drain carburetorsplace engine in upright position and remove
carburetors for disassembly and draining6Starters, electrical connectors, and all electrical equipment should be completely
disassembled, cleaned, flushed with fresh water, treated with water displacing electrical spray, and thoroughly dried before
assembly7Inject outboard lubricant into spark plug holes8Reassemble parts you removed and disconnectedStart engine (follow
starting instructions) and run 12 hour using the "break-in" fueloil mixtureRun the engine on "break-in" fueloil mixture for
approximately three hours after servicingSee Break-in Procedure in this section For models with if oil line has become disconnected,