1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 64Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 64

Preliminary Adjustments 1Turn the ignition stop switch knob fully counterclockwisef51 2Turn the throttle arm stop screw and
until the cam on the and the cam follower are touching at bisect point throttle cam1sl 3When the throttle arm stop screw
is properly adjusted and the cam and the cam follower are touching at the bisect point, tighten the cam follower screw Q)Do
not readjust the throttle arm stop screw after this step There must be 0.005 in(0,13 mm) clearance between the throttle cam
CD and cam follower to ensure that all throttle plates are closed at idleWide Open Throttle Stop lsi 1With the engine not
running, twist the throttle grip to move the throttle arm toward wide open throttle positionLoosen locknut Adjust wide open
throttle stop screw so that the carburetor throttle plates approach wide open position1sl 2Adjust screw until W.O.T mark