1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 75Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 75

Heli-Coillnserts and Installers Il Use these Heli-Coil inserts on all models to repair damaged threadsThe installation kit
Heli-Coillnserts, 38-16 Heli-Coillnserts, 1 -13 Heli-Coillnserts, 314-16 Heli-Coillnserts, 14 mm (318 in Reach) Heli-Coillnserts,
14 mm (112 inReach) PCE00 27 Installation Instructions 1Drill to adequate depth using drill size supplied with kit2Use Heli-Coil
tap supplied with packCheck thread size on shank to make certain proper size is used3Screw insert onto mandrel until tang
is fully engaged in driving contour4Screw insert into tapped holeTop of insert must be onequarter to one-half turn below
top surface5The tang must be removed to allow full passage of screw into the insertThe tang may be broken off cleanly at
the notch in the bottom coil with punch or rod having diameter that just fits into the assembled insertMake sure that the