1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 86Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 86

Installation Recommendations f'N=J Carefully, follow the installation instructions packaged with If the system is not used,
to maximum of 25 ft(7,6 m)If the installation is extended, the oil hose between the primer bulb and engine must be one continuous
section with no fittings or connectionsDo not add on to the existing hoseThe wiring harness can be extended by soldering
on additional 16-gauge wire to each leadProtect the connections with shrink color for identificatube and electrical tapeObserve
proper tion4When making connections in the oil supply system, use only the clamp supplied with the system Do not use tie
strapsThey do not provide adequate clamping action Do not use metal worm clamp on vinyl hoseIt can damage the hose and cause
leakage5Test the "Iow oil" warning circuit before filling the oil reservoir: Make all electrical connections and connect
the engine's battery Turn the key switch ON With the reservoir empty, the warning horn should sound for 12 second every 40