1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 91Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 91

f41 4Install and secure 1O-in(25 cm) length of in(6,35 mm) I.Dclear vinyl hoseA few inches from the loose end, measure carefully,
finger pressure on the outlet hose At 800 RPM, the oil level in your hose should drop in(25,4 mm) in approximately five pulses
At full throttle, the oil level in your hose should drop in(25,4 mm) in approximately three pulses7If your results vary,
check the pulse limiter fitting before replacing the pump8If you remove the pump, carefully cut the hose to avoid damaging
the fittingWhen installing, use ratchet clamp on the oil supply hoseTorque the screws, pump-to-bracket, to 18-24 inIbs(2-3