1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 102Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 102

8Carefully, remove the fuel hoses and remove the carburetor assemblyDisassembly '7l 1Discard the O-ring seal between the
side cover plate and discard the plate gasket f121 7Remove the idle and intermediate circuit air bleed orifices with OMC
Driver, PIN 3170028Remove the slow speed needle and springInspection 1Inspect carburetor main body and float chamber: Gasket
surfaces must be smoothno nicks or irregularities All nozzles and pickup tubes must be securely in place All metal orifice
inserts must be securely in place2Thoroughly clean components with OMC Carburetor and Choke CleanerDo not clean carburetor