1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 104Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 104

18 Assembly 1,7l 1If removed, install new core plugs in throttle body with the convex side upSeat with flat end of drift
inIbs(2-3 Nm) 5Install new float chamber gasket on the main body 6Install float valve seat in float chamberr::;:;l 7Clip
float valve to floatValve's clip must face chamber's port sideInstall float assemblyTighten hinge pin retaining screw securely1221
8Adjust float height with chamber invertedFloat must be level with gasket surface, 132 in(0,8 mm)If adjustment is required,
do not put pressure on float valve and seat 9Install high speed fuel orifice with DMC Driver, PIN 317002, and install float