1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 105Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 105

1241 11 Install new O-ring seal, and attach main body to throttle bodyTorque mounting screws in fiX" pattern to 45-55 inIbs(5-6
straps 1251 3Position carburetor and engage throttle shaft connector link(s)1261 4Install two nuts and two screws per carburetor,
and tighten in an "X" pattern to 120-144 inIbs(14-16 Nm)27 5Route and connect all primer hosesRefer to Hose Routing Chart,
this section fuel and primer hoses must be routed correctly to ensure proper fuel delivery and prevent hard starting 6Momentarily