1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 139Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 139

Stator Servicing Removal i starting while servicing engine Twist and remove all spark plug leads to avoid accidental 1Remove
its retaining screws2Install the stator and route the leads rJl 3Use only patch lock screws to retain the statorReplace any
patch lock screw that has lost its locking featureApply OMC Locquic Primer, then OMC Nut Lock, to threads of screws 4Tighten
all screws to torque of 120-144 inIbs(14-16 Nm)5Attach stator and power coil leadsV4Coat final connectors ith OMC Neoprene
Dip6Refer to Flywheel Servicing for correct flywheel installation procedure7Route and connect charge coil lead(s) r:=J After