1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 213Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 213

f311 38Tighten the rod cap screws to torque of 25-30 inIbs(2-3 Nm) 39Apply light coat of outboard lubricant to the corners
rodcrankpin diameterThe above procedure must be followed to assure frame is squarely in position34 40Tighten the forcing
screw to torque of 23 inIbs(2,5 Nm) 41Loosen both rod cap screws turn351 42Apply preliminary torque of 40-60 inIbs(5-7 Nm)
to both rod cap screws43Apply final torque of 42-44 ftIbs(57-60 Nm) in two alternate increments to both rod cap screws44Loosen
forcing screw and remove the frame Repeat Steps 38 thru 43 for remaining connecting rods1361 45Thoroughly clean and degrease