1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 214Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 214

1381 47Apply OMC Gel-Seal Ito the crankcase mating flange of the cylinder blockThe application must cover the flange evenly
main bearing screws finger tight1401 50When the crankcase taper pinis seated, install and firmly seat the 1411 51Torque main
bearing screws in stages to 26-30 ftIbs(35-41 Nm)Begin with the center screws and work outward in spiral pattern 1421 52Install
the crankcase flange screws and torque to 60-84 inIbs(7-9 Nm) 14311441 53Apply OMC Locquic Primer and OMC Nut Lockto the
upper and lower crankcase head screws and install themTorque them to 72-96 in Ibs(8-11 Nm) 54Connect all crankcase recirculating