1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 229Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 229

40 140140Using OMC Rope Threading Tool, PIN 378774, thread the rope through the starter handle41Place the starter rope in
damage and wear143 144If required, replace the lockout components as follows: Coat the shaft with OMC Triple-Guard grease
Place the thicker flat washer on shaft Place lower lockout lever Place two springs Place upper lockout lever on shaft Place
the thinner flat washer on shaft Install locknutReplace locknut if you do not feel definite resistance to tightening Torque