1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 257Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 257

f151 8Clean and degrease the adapter housing and outer exhaust housing mating surfaces with OMC Cleaning SolventApply OMC
washer under the forward starboard screwf171 12Align the outer exhaust housing and adapter by placing two powerhead mounting
screws through their holesf181 13Torque the four mount plate screws to 22-24 ftIbs(30-33 1.J9l 14Torque the small adapter
to exhaust housing screws and nut to 60-84 inIbs(7-9 Nm)15If removed, coat the lower mounts with soapy water and press into
the exhaust housingNotice one side is identified "OUT i and torque them to 150-180 inIbs(17-20 Nm) 16Insta II the lower mou
nt coversInstall the screws Replace any lock patch screw if its locking feature becomes weakDefinite resistance to tightening