1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 261Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 261

r:J5l 10If removed, install new inner exhaust housing sealApply OMC Adhesive to the seal groove '16l 11Clean and degrease
plate screws and install the plate and screws looselyInstall the ground lead and star washer under the forward starboard
screwf181 15Align the outer exhaust housing and adapter by placing two powerhead mounting screws through their holesf19l
16Torque the four mount plate screws to 22-24 ftIbs(30-33 1201 17Torque the small adapter to exhaust housing screws to 60-84
inIbs(7-9 Nm)18If removed, coat the lower mounts with soapy water and press into the exhaust housingNotice one side is identified
"OUT 19Install the lower mount coversInstall the screws and torque them to 150-180 inIbs(17-20 Nm) Replace any lock patch