1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 265Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 265

f141 6Install the adapter housing on the outer exhaust housingAlign the water tube 7Loosely install the small retaining screws8Lubricate
adapter by placing two powerhead mounting screws through their holes1171 11Torque the four mount plate screws to 22-24 ftIbs(30-33
Nm)1181 12Torque the small adapter to exhaust housing screws to 60-84 inIbs(7-9 Nm)f191 13If removed, coat the lower mounts
with soapy water and press into the exhaust housingNotice one side is identified "OUTSIDE 1201 '" 14Install the lower mount
coversInstall the screws and torque them to 150-180 inIbs(17-20 Nm)Replace any lock patch screw if its locking feature becomes