1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 291Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 291

G8l 21Position the driveshaftthrust bearingthrust washerand shim(s) (selected earlier) on the driveshaftG8l r::=J Position
install the driveshaft25Lightly coat the threads of the pinion nut with outboard lubricant and install on the driveshaftTurn
the driveshaft by hand to engage the nut26Turn the gearcase right side upUsing OMC Driveshaft Socket, PIN 311875, and OMC
Pinion Nut Holder, PIN 334455, torque the pinion nut to 70-80 ftIbs(90-108 Nm)Overtorquing or undertorquing the pinion nut
will reduce pinion lifeDo not reuse damaged pinion nuts 1221 27Position the washers on the driveshaft bearing housing screwsApply
OMC Gasket Sealing Compound to the threads ofthe screwsInstall and tighten screws to torque of 168-192 inIbs(19-22 N.m) 23
28Oil, then install the thrust bearing Q) and large thrust washer CD on the hub of the reverse gearSlide the reverse gear