1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 293Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 293

1301 31Before installing lubricant, pressure test and vacuum test the gearcase as follows: Remove the oil level plug, and
lubricant32Fill the gearcase with lubricant as follows: Secure the gearcase in an upright position Remove the oil level plug
and the drainfill plugReplace their seals, if damaged Fill the gearcase with OMC Ultra-HPFgearcase lube until it appears
at the oil level holeInstall the oil level plug, then the drainfill plugTighten them to torque of 84-86 inIbs(9-10 Nm) Check
the oil level after the motor has been run132 33Adjust the shift rod as follows: Check the shift rod height from the shift
rod hole to the surface of the gearcase using OMC Universal Shift Rod Height Gauge, PIN 389997 With the shift rod in NEUTRAL
and the offset facing forward, rotate the shift rod full turns up or down as necessary for correct adjustment Shaft Length
20 in(508 mm) 22112 in(571 mm) 25 in(635 mm) 30 in(762 mm) 21 151 132 in557,3 0,8 mm 24 716 1132 in620,7 0,8mm 26 1516 1132