1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 309Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 309

12 12308 16Locate the propeller shaft assembly and orient the forward bearing housing with the detent lever toward the topPush
r:J3l 18Apply OMC Gasket Sealing Compound to both sides of new shift rod cover gasketPosition the gasket on the gearcaseInsert
the shift rod and cover assembly into the gearcase as shown, and thread the shift rod into the detent lever about four turns19Move
shift rod from side to side while pushing on the propeller shaft to ensure proper alignment of the bearing housing locator
pin into the locator pin hole in the gearcaseTap the end of the propeller shaft with plastic or rawhide malletto fully seat
the bearing housingr;;J 20Apply OMC Gasket Sealing Compound to the threads of the shift rod cover screwsInstall the screwsTighten