1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 317Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 317

Isl f71 8Pull up on the driveshaft to remove it from the gearcase The driveshaft to pinion taper is locking taperIf necessary,
bearings that may have fallen into the gearcase11Push down on the shift rodThis will move the detent lever downward to clear
the inside of the gearcase when the propeller shaft assembly is pulled outr,Ql 12Completely unscrew the shift rod, but do
not pull it out of the shift rod coverRemove the six cover screws, then lift off the shift rod and cover assemblyDiscard
the gasket underneath r,v f121 13Reach into the shift cavity with suitable tool and depress the detent leverWhile holding
the detel")t lever down, pull the clutch shaft and bearing housing assembly out of the gearcaseIfthe detent lever is not
held in the fully depressed position, it will pop up when the clutch shaft is pulled and prevent removal of the clutch shaft