1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 319Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 319

23Remove the pinion bearing only if it needs to be replacedBefore attempting removal: V6Remove bearing retaining ring from
draw the bearing up and out of the gearcase Make sure all loose needles are inside bearing case before pulling bearingThe
needles will provide surface for the remover tool to pull againstreplace it 25If water intake screen cannot be unplugged
by cleaning, vaRemove screw on starboard side of gearcase above screenPlace screwdriver on each side of the intake screen
under the locating tabsSimultaneously, press in and up on both sides to free screenTo install new screens, place port side
in first, wide end downPush down and to side until screen bottoms in cavityPlace starboard side in and press down until screen