1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 320Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 320

Forward Gear, Propeller Shaft, and Bearing Housing Servicing 1Remove and discard the bearing housing O-ring2Remove the anode
from either the flange or forward gear Remove the thrust bearing 7Remove the bearing housing from the forward gear8Remove
the thrust bearing from the forward gear9Inspect the forward gear for excessive wear or damagerJl 10Remove the forward gear
bearing only if it needs to be replacedIf removal of the bearing is necessary, use OMC Large Puller Jaws, PIN 432129, and
OMC Puller Bridge, PIN 432127, with an appropriate baseLeave the rollers in to allow for good contact with the puller jaws