1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 321Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 321

11If removed, install new forward gear bearingApply OMC Needle Bearing Assembly Grease to 25 new rollersInstall the rollers
needle makes contact with the flange on the housingThe indicator needle must be parallel with the side of the gear housing
and perpendicular to the table surfaceZero the dial indicatorr:j3l 19Grip the bearing housing 1800 apart and pull up to get
reading on the indicatorTo determine thickness of shims, use the following example: 0.030 inof shims in the assembly0.020
inyour reading on the dial indicator + 0.001 innecessary end play 0.011 inrequired shims 1.I1l 20Remove the 0.030 inof shims
from the assemblyReassemble the gear assembly using combination of shims to achieve the required thicknessApply OMC Nut Lock