1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 324Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 324

Driveshaft Bearing Housing Service The driveshaft bearing housing is not serviceableReplace the bearing housing if the bearing
housing, then the outer seal with extended lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal
lips after installing f41 5Lightly apply OMC Triple-Guard grease to new -ringInstall the -ring in top groove of the bearing
housing Do not install the -ring in the bearing housing's bottom grooveThe bottom groove is an oil passageGearcase damage
could resultDriveshaft Servicing 1sl 1To separate the upper driveshaft from the lowe-r driveshaft, remove the roll pinReplace
the damaged component 161 2To assemble the driveshaft, install the driveshaft retainer into the groove of the upper driveshaftf.71
3Install the upper driveshaft into the lower driveshaft, aligning the holes in the driveshaft retainer and the lower driveshaft