1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 325Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 325

0.125 in(32 mm) 0.062 in(1,6 mm) Driveshaft Shimming Using Tool, PIN 393185 The driveshaft pinion is precisely meshed with
housingthrust washerthrust bearingand pinion onto the driveshaftUse OMC Driveshaft Seal Protector, PIN 318674, whenever installing
or removing the bearing housingLightly coat the threads of the pinion nut with outboard lubricantTighten the pinion nut to
torque listed in chart: Pinion Nut Torque 70-80 ftIbs(95-108 Nm) 100-110 ftIbs(136-149 Nm) PCE0047 2Select the correct gauge
and collar: V6OMC Gauge, PIN 328367, and OMC Collar, PI 328362 V8OMC Gauge, PIN 330224, and OMC Collar, PI 328362 f111 3Slide
the collar onto the driveshaft with large end in contact with the bearing housingand tighten preload screw against the driveshaft