1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 327Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 327

1Assemble as shown from OMC Universal Pinion Bearing Remover and Installer, PIN 391257: -20 12 inHex Head Screw in0.0Flat
of the bearingThe bearing is tapered so when installed correctly, its shape compensates for stresses in the gearcase and
allows full bearing contactWhenever you disassemble gearcase, check the pinion bearingit must be in place with the lettering
facing up 3Insert the tool with the bearing into the gearcaseDrive the bearing into the gearcase until the washer on the
tool contacts the spacerRemove the toolUsing rag, remove any excess grease from surface of the needle bearings4Install pinion
bearing retainer: V6Seat pinion bearing retaining ring in groove on top of the bearing Position new a-ring on the pinion
bearing retaining screwApply OMC Nut Lock to screw threads and a-ringInstall the screw and tighten to torque of 48-80 inIbs(5-9
Nm) 5To install the water intake screen, drop it into the water intake cavity, and push it down as far as it will go with