1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 330Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 330

18 13582 18Press the detent lever down to engage REVERSE (lowest) positionThis will provide clearance to install the clutch
shift rod cover a-rings with OMC greaseInstall the a-rings into the shift rod cover 221 22Place the shift rod grommet and
shift rod spacer on the shift rodGrease the threaded end of the shift rod and insert it through the coverTurn the shift rod
while pushing it through the cover to avoid damaging the a-ringsnew shift rod cover gasket Position the gasket on the gearcaseThread
the shift rod into the detent lever about four turns 1231 23Apply OMC Gasket Sealing Compound to both sides of a 24Move shift
rod from side to side while pushing on the clutch shaft to ensure proper alignment of the bearing housing locator pin into