1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 331Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 331

COA3130 1251 26Position the driveshaft thrust bearingthrust washerand shim(s) (selected earlier) on the driveshaftPosition
is removed from the pinion needle bearingsDegrease taper of the pinionPosition the pinion in the gearcase30Deg'rease the
driveshaft taper and install the driveshaft, 31Lightly coat the threads of the pinion nut with outboard lubricant and install
on the driveshaftTurn the driveshaft by hand to engage the nut1281 32Turn the gearcase right side upUsing OMC Driveshaft
Socket, PIN 311875, and OMC Pinion Nut Holder, PIN 334455, tighten the pinion nut to torque listed in chartPinion Nut Torque
70-80 ftIbs(90-108 Nm) 100-110 ftIbs(136-149 Nm) PCE0047 Overtorquing or undertorquing the pinion nut will reduce pinion