1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 348Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 348

High Voltage some leakage) to the other terminals in the key switch, but will not show up with test light or an ohmmeterThis
applying test to other "M" terminal, turn key to the "ON" position 1161 In some conditions, the key switch may be shorting
(allowing Neutral Start Switch Test All engine wiring must be disconnected from the switch before proceeding with this check
1Disassemble the remote controlf17l 2Calibrate ohmmeter on appropriate scaleConnect one meter lead to each switch terminalMeter
should show: High reading when the plunger is relaxed Low reading when the plunger is depressed3Replace the neutral start
switch if your test results varyReassemble the remote control i blyAn undetected problem in the remote control could cause