1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 353Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 353

Assembly 1Lubricate the armature shaft bearing surface with one drop of SAE No10 oilLubricate the pinion helix on the armature
and holderInsert insulated brushes in holderr:t1l 7Assemble commutator end cap to frame and field, aligning notch and rib
suitable tool for holding brushes in place can be made from putty knife i motorInstall thru-boltsTighten thru-bolts to torque
of 95-110 inIbs(11-12 Nm)Seal with OMC Black Neoprene Dip around end caps9Refer to No Load Current Draw, Electric Starter
to check starter operationInstallation 1Apply OMC Locquic Primer and OMC Nut Lockto the threads of the three mounting screwsPosition
starter, and install the mounting screws and lock washers2Torque the three screws to 14-16 ftIbs(19-22 Nm)3Reconnect the
starter motor lead to the starter motorApply OMC Black Neoprene Dip to the connection4Connect negative battery cable to the