1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 369Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 369

r:;:;J 9With the engine not running and the key switch in the liON" position, connect voltmeter to engine wiring harness
Replacement Removal lNotel Disconnect battery cables at battery before proceeding14 1Remove the power pack 2Swing the electrical
component bracket away from the powerhead to expose the rectifierregulator3Remove rectifierregulator red lead from starter
solenoid4Loosen and remove the six retaining screws and the rectifier regulatorInstallation 1Coat both sides of new gasket
with OMC Gasket Sealing Compound and install gasket and new rectifierregulator2Coat the threaded portion of the six retaining
screws with OMC Gasket Sealing Compound and install themThe two front center screws have star washersTighten them to torque
of 36-84 inIbs(4-9 Nm)3Attach the rectifierregulator red lead to the battery side of the starter solenoid4Install the electrical