1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 390Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 390

Belt Tension Procedure 1Be sure drive belt is in good condition and correctly routedBelt must engage all pulley grooves [TI
tension using OMC Gauge, PI 984850, midway between the idler and flywheel pulleysBelt tension is correct when the plunger
is flush with the end of the handle 5Start engine and run it at 800 RPM for two minutesStop engine and repeat Steps and 4