1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 395Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 395

Spool Valve Shimming This procedure must be performed if the spool valve, housing, or seals have been replacedThis procedure
from the spool valve Save the washers Isl f6l 6Install one O-ring PIN 912357 (0.734 0.139 in on the new spool valveLubricate
both parts with OMC Power TrimlTilt and Power Steering Fluid or Dexron I fluidInsert the spool valve in the side of the valve
body where it was removed I6l 7Push in on the clevis end of the spool valve with about five pounds of forceMeasure the distance
between the valve flange and the valve body with caliperWrite down and label this measurement as dimension the valve body
71 8Remove the spool valve and insert it in the opposite side of Isl 9Push in on the clevis end of the spool valve with about