1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 396Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 396

10 10To find the correct number of shims required for the CLEVIS END, put your and (J) values in this formula and calculate
-rings wit OMC Power TrimlTilt and Power Steering Fluid or Dexron I r,()l 13Remove the -ring from the spool valveInstall
the calculated number of shims for CLEVIS END on the spool valve first, then install an a-ring Lubricate the parts with OMC
Power TrimlTilt and Power Steering Fluid or Dexron I fluid [!!] 14Install the spool valve assembly in the valve body1,2l
15Install the calculated number of shims for WASHER END on the spool valve first, then install an a-ring CDReinstall the
washers and locknutf13l 16Tighten the spool valve locknutto torque of 18-21 ft.lbs(24-27 Nm) 17Install new cotter pin Q)