1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 397Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 397

11 Assembly L!J TrimlTilt and Power Steering Fluid or Dexron IIInstall the piston into the cylinder2Lightly oil the end cap
bracket and slide the tilt tube into place ill you do not feel definite resistance to tighteningTorque the locknuts to Va
to 14 turn4Position the steering connector inside the spool valve housingTurn the engine to extend the connector past the
end of the housing5Position the bellcrank under the steering connector 3V8Install the starboard locknutReplace the locknut
if 50-54 ft.lbs(68-73 Nm) and then loosen one locknut W f161 6Place the spacer and bellcrank through the steering connector
1 1511161 7Place flat washer on top of the spacer8Rotate the engine to position the steering connector and bellcrank inside