1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 415Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 415

DRC3464 Manual ReleaseUP 1You can manually raise the engine in both trim and tilt rangesOpen the manual release valveturn
desired final position (up into the tilt range, if necessary)Close the manual release valveManually, push the gearcase in
(or down) until it is supported by the trim systemOpen the manual release valve only enough to let the engine trim in to
desired position ill suitable hoist or engage either its tilt support or trailering bracketDo not attempt to hold the engine
up by closing the manual release valveThe engine must be held manually, and lowered to the trim range manually, after it
has been tilted up manuallyThe motor can drop to the trim range if the support is removedClose the manual release valve firmlyThe
manual release valve must be closed to enable the trimtilt unit to functionE u To tilt engine UPOpen manual release valve