1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 438Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 438

[] 12Place cylinder body in vise, as shown1141 13Using OMC Tilt Cylinder End Cap Removerllnstaller, PIN 326485, or OMC Universal
check ball V4All four plungers and check balls are identicalThree ofthe springs are one length, the fourth spring is shorterUpon
reassembly, the shorter spring can be positioned in any hole in the pistonReassemble the piston by placing one ball, one
plunger, and one spring in each of the four holesV6All four plungers and check balls are identicalTwo of the springs have
five coils and the other two have nine coilsReassemble the piston by placing one ball and one plunger in each of the four
holesPlace one five-coil spring in each cavity of the piston with the large relief holePlace one nine-coil spring in each