1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 445Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 445

Trim Sending Unit Adjustment 1Tilt the engine and engage the mooring bracket" 2Temporarily, install PIN 387278 thrust rod
down6Lower the engine against the thrust rod to verify adjustmentRepeat Step 5, if necessary7After adjustment is correct;
tilt the motor up, tighten the two sending unit screws, and remove the thrust rod J1 5Observe the trim gaugeIf the needle
does not show center was when the motor was brought in for serviceLeaving the trim limiter rod out, or changing the adjustment,