1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 447Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 447

Description of Operation valving, oil reservoir, oil pump, electric motor, and two hydraulic trim cylindersAttached to the
trimmed out positionAttempts to tilt the motor when operating over 1500 RPM will have no effectOperation of the unit in the
down direction is the opposite of movement in the up directionThe tilt cylinder moves first until the swivel bracket is resting
on the trim rods, which then begin to move Gl The power trimtilt unit consists of manifold that contains all The motor can
be raised or lowered through the tilt range manually without electrical assistance using the manual release valve on the
starboard side of the unitThere is screwdriver access hole in the stern bracket The slotted valve can be opened to allow
oil to flow from one side of the tilt cylinder to the otherThe manual release valve must not be opened more than one and
one-half turnsThe manual release valve must be closed to reactivate the motor's shock absorption system and reverse thrust
capability f2l trim gauge is provided with the motorA sending unit is attached to the port stern bracketIt is accessible